SIXTY solar panel for wildlife cameras

AUTONOMOUS, NEVER-ENDING POWER SUPPLY

integrated lithium-ion battery with 6,800mAh
significantly extends the lifespan of camera batteries
saves the environment and your wallet
compatible with all 6V and 12V wildlife cameras that have a 4.0 x 1.7 mm barrel connector
can be charged via USB-C
robust, weatherproof camouflage housing, protection class IP67
Solar power first charges the built-in battery and then any connected battery packs
easy installation thanks to the included mount

ABOUT THE SOLAR PANEL The SEISSIGER solar panel is an additional power source for wildlife cameras.
The solar panel features a built-in lithium-ion battery that is continuously charged by the solar cells when exposed to sunlight. After connecting, the camera is powered as long as possible by the charged lithium battery of the solar panel and only switches to the internal batteries when the charge level of the solar panel's battery is temporarily too low. This significantly extends the lifespan of the camera batteries.
Before the first use of the solar panel, we recommend fully charging the built-in battery once at the outlet with a USB-C charging cable (takes up to 12 hours).

The solar panel can be used with 12V and 6V wildlife cameras.
You will receive two DC output cables, a 12V cable (left) and a 6V cable with voltage converter (right). SEISSIGER cameras use the lower voltage of 6V; many other wildlife cameras operate at 12V and use the left DC cable. The cable length is 150cm.

To connect the solar panel to the camera, select the appropriate cable. On one side of the cable, there is a thread below the connector. This side belongs in the solar panel. Open the left rubber cover and carefully screw the connector into the internal thread of the solar panel. Please ensure that you do not screw the cable in too tightly, as you may damage the thread on the cable.
Finally, connect the camera socket of the solar panel to the input socket for external power supply of your camera (see the user manual of your camera model).

Technical specifications:
Power requirement: 5V min 500mA
USB charging voltage: 5V-9V
Discharge voltage: 12V
Max. discharge current: 2A
Max. charging voltage protection: 6V
Recommended charging time: 12 hours for full charge
Charging priority: If both USB and solar charging sources are available, USB charging has a higher priority.
Operating temperature: -20 to 40°C (Storage temperature: -30 to 70°C)
Operating humidity: 5% – 90%

Scope of delivery:
SEISSIGER solar panel, ball head mount including dowels, connection cable for 12V wildlife cameras, connection cable for 6V wildlife cameras, USB power supply with USB Type-C cable
Dimensions: 16 x 23 x 2.5cm
Cable length: 150cm
Weight: 650g