ERATAC Ultralight - Extended Block Mount - None - 34 mm

Weight under 150 grams! Specifically developed for official use on assault rifles of the AR15 type as well as for use in dynamic shooting disciplines such as IPSC, the variant extended by 56 mm was created, which provides sufficient eye relief for all shooting positions. The shortened mounting foot also facilitates gripping the adjustment ring for magnification.

With a focus on the needs of users, a scope mount was created that impresses with its very low weight in its minimalist design. Compared to our standard block mounts, the weight could be reduced by about 50%. The universal interface was deliberately omitted.

Specifically developed for official use on assault rifles of the AR 15 type as well as for use in dynamic shooting disciplines such as IPSC, the offset variant extended by 56 mm before the clamp was created. It offers sufficient eye relief for all shooting positions. The shortened mounting foot also facilitates gripping the adjustment ring for magnification. The version with 20 MOA inclination is particularly suitable for shooting at long distances.
Manufactured to military standards
Manufacturing to military standards and the hard-anodized surface according to Mil-Spec Type III in matte black guarantee absolute rust resistance of all components. The clamping on Picatinny rails is done using Torx screws and provides a secure connection that does not rely on loseable parts.
100% recoil-proof
All ultralight mounts impress with their absolute recoil resistance up to caliber .50, which has been impressively demonstrated through independent testing.

TECHNICAL DATA
Ø 25.4 mm / 1"

Height: 24 mm / 0.96"
Axis height: 37 mm / 1.46"
Inclination: -
Weight: 146 g / 5.15 oz
Order No.: T3022-0024

Ø 30 mm

Height: 22 mm / 0.87"
Axis height: 37 mm / 1.46"
Inclination: -
Weight: 147 g / 5.19 oz
Order No.: T3023-0022

Ø 34 mm

Height: 20 mm / 0.79"
Axis height: 37 mm / 1.46"
Inclination: -
Weight: 148 g / 5.22 oz
Order No.: T3024-0020

Ø 25.4 mm / 1" (with 20 MOA)

Height: 24 mm / 0.96"
Axis height: ~35 mm / ~1.38"
Inclination: 20 MOA
Weight: 146 g / 5.15 oz
Order No.: T3022-2024

Ø 30 mm (with 20 MOA)

Height: 22 mm / 0.87"
Axis height: ~35 mm / ~1.38"
Inclination: 20 MOA
Weight: 147 g / 5.19 oz
Order No.: T3023-2022

Ø 34 mm (with 20 MOA)

Height: 20 mm / 0.79"
Axis height: ~35 mm / ~1.38"
Inclination: 20 MOA
Weight: 148 g / 5.22 oz
Order No.: T3024-2020

For more information & details, you can find them on the manufacturer's page:

ERATAC Block Mounts