EOTECH HWS EXPS3 (Black / TAN) - Tan (Sand) - -2

Faster target acquisition with enough space for rear sight, front sight, and night vision devices.

Overview
The HWS EXPS3™ is an excellent choice for professionals. It allows for true dual-eye shooting for quick target acquisition, features night vision-compatible settings, and a 7 mm raised quick-release mount for a lower 1/3 co-witness with rear and front sights.
Included: ✔ HWS EXPS3™ ✔ Quick start guide ✔ Warranty card ✔ CR123 battery

Technical Data
✅ Night vision compatible
? Dimensions (L x W x H): 96.5 x 58.4 x 73.7 mm ⚖ Weight: 317.5 g ? Water resistance: Up to 10 m depth ? Mount: 1" Weaver or MIL-STD-1913 rail ? Elevation & windage adjustment: 0.5 MOA per click ? Brightness: ▪ 20 daylight settings ▪ 10 additional settings for Gen I to III+ night vision devices ? Power supply: 1 x CR123 battery ⏳ Battery life: Up to 1,000 hours at setting 12 (room temperature) ? Operating temperature: -40 °C to 60 °C ? Country of origin: Made in the USA

The EXPS3 is the most compact model ever. It is smaller and lighter than other Holosights and operates with just one CR123 battery. With the new battery configuration, there is more space on the Picatinny rail than ever before. The battery life is approximately 600 hours. The reticle is parallax-free. The integrated 2 M.O.A repeatable quick-release mount for Picatinny and Weaver rails results in a 7mm raised position.

Compared to the XPS 3-0, the controls have been moved to the side. This allows for the EOTECH Magnifier G30/G33/G43G45/ to be mounted directly behind the device. The rail length required for mounting is only 67mm.

RETICLE VARIANTS

EXPS3-0

EXPS3-2

EXPS3-4

DCR & green reticles available upon request...

_

Specification

Reticle / Speed Ring
The outer ring has a diameter of 65MOA (30cm at 50m) and is used for quick target acquisition.

Reticle / Dot
Depending on the selection, 1x, 2x, or 4x 1MOA dot (3cm at 100m) is currently the smallest available sight dot for reflex sights.

Reticle appearance
Circle-dot

Reticle color
Red

Mounting
Picatinny mount

Night vision option
YES

Waterproofing
Dive-proof up to approx. 10m

Sealing
Fog-free, hermetically sealed

Protection
Protective hood made of hard-anodized, matte black aluminum

Brightness levels night
10 brightness levels for use with night vision devices

Brightness levels day
20 brightness levels

Shutdown
Automatic shutdown (programmable)

Adjustment
Adjustment per click, 0.5MOA at 100m

Adjustment range
Adjustment range +/- 40MOA

Power supply
CR123 battery (not included)

Battery warning
Warning for low remaining energy

Dimensions
Dimensions 91x60x71 mm

Weight
Weight: 317g

The EOTECH EXPS3-0 in tan is only available with the reticle A65 (one dot) and with 2 holdover marks (EXPS3-2). The EXPS3 is available with various holdover marks: -0, -2, or -4.
For more information & products from this manufacturer, visit:

WWW.EOTECHINC.COM