G&G GC16 MPW 9" with ETU in black Airsoft S-AEG free from 18

The G&G GC16 MPW S-AEG airsoft rifle in caliber 6 mm BB with E.T.U. (Electronic Trigger Unit) and approx. 1.5 Joules of energy belongs to the GC series and is G&G Armament's entry-level series. However, there are significant differences compared to entry-level models from other manufacturers, as the GC16 MPW clearly belongs to the upper league and can easily compete with other renowned brands that also use an EFCS, ASCU, or comparable trigger system. The weapon housing, also known as the body or lower receiver and upper receiver of this airsoft gun, is made of aluminum and is extremely stable. G&G processes exceptionally high-quality materials with a very pleasant and realistic feel. Once in hand, you won't want to put it down. The handguard with Keymod made of aluminum is CNC machined and perfectly fitted to the body. It features 10 mounting positions and is so secure that nothing wobbles, creaks, or rattles. Here, G&G has recognized the advantages of the Keymod system and improved it compared to other manufacturers. Since G&G only uses high-quality aluminum, a thicker material thickness can be avoided. Due to the precise processing of the material, all common Keymod attachments available on the market fit the handguard. On the aluminum handguard and the body, there is a Picatinny rail according to MIL-STD-1913 or STANAG 2324 (NATO) on which all types of sights, whether telescopic sight or red dot sight, can be mounted. From the factory, G&G has installed a horizontally and vertically adjustable rear sight as well as a height-adjustable front sight. Both the rear and front sights are made of aluminum and are foldable as "Flip-Up." The outer barrel that G&G installs from the factory is made of aluminum with the same precision as the handguard and features a 14 mm left-hand thread for mounting a suppressor replica or a tracer unit for urban combat. G&G has also put a lot of thought into a realistic appearance and has not hesitated to install a gas block system that mimics the real thing on the outer barrel. The fire selector lever is located on the left side and clicks perfectly into place on the various settings. Thanks to the slightly curved trigger guard, the trigger can also be easily operated with gloves. The pistol grip is ergonomically shaped. The sling swivel above the grip has a mount for carrying straps on the left side. The magazine release for ejecting an empty magazine can be operated from both sides of the weapon. To access the adjustable hop-up in the ejection port, you pull the charging handle back. The T-shaped charging handle on this model features ambidextrous locking notches that are synchronized. Whether you pull from the left, right, or both sides, the charging handle is easy to operate. The GC16 MPW is delivered with a rubberized high-cap magazine. The magazine holds about 300 BBs and is loaded by turning the winding wheel. The stock of the rifle accommodates an 11.1 Volt Lipo triple-stick battery, which can also be used with more than 25C; about 8 years ago, this was limited to a maximum of 15C. However, G&G has long since improved this. The battery is very easy to store in the stock. To do this, the rubber cover is unlocked and turned. At the bottom of the stock, there is a compartment for holding, for example, two CR123 batteries. This compartment can be opened via a locking button. The stock of the GC16 MPW can be adjusted in 5 positions and can be locked in each position. At the top end of the stock, there is a dual-sided hole for mounting quick-release sling mounts. The installed E.T.U (Electronic Trigger Unit) ensures a quick response and an extremely high rate of fire. In our extensive tests, it was not...
It is possible for the model to jam (when using an 11.1 Volt Triple-Stick Lipo battery), regardless of how quickly the trigger is pulled in succession (however, a clean shot cycle is a prerequisite). To prevent issues with triggering, we recommend installing a Gate TITAN™. The micro switch built into the switch unit, which controls the E.T.U, additionally provides a clean "pressure point," allowing for precise estimation of when the shot breaks. The gearbox installed in the G&G is the typical V2 G&G metal gearbox with 8 mm ball bearings. The inner barrel of the G&G GC16 MPW is approximately 260mm long. With an adjustable hop-up chamber, the range and precision of the assault rifle are exceptional in its class. The muzzle velocity is max 400FPS with 0.20 g BBs, which corresponds to an energy of 1.5 Joules. We recommend using high-quality G&G BBs starting from 0.25g. A battery is not included in the delivery. A charger is not included in the delivery.