DDOPTICS SCOPE - NIGHTEAGLE V6 5-30x50 - LONG RANGE - MRAD - MILDOT

```html
DDOPTICS SCOPE - NIGHTEAGLE V6 5-30x50 - LONG RANGE - MRAD - MILDOT

The perfect scope for the demanding sports shooter.

CT glass (Clear Transmission)
Zero stop (for zero setting)
Double turn (double scaling)
Horizontal adjustment with opposing scales (wind left - right)
very high resolution
MRAD adjustment 1 cm at 100 m
Accessories: 1x flip caps, cleaning cloth, DDoptics chip, target sheets, target optics manual, ballistic set

Scope with quick adjustment & zero stop
On the vertical adjustment, a double scale allows the number of clicks made to be read and set. After zeroing, the reticle adjustment can be "zeroed" by loosening the turret lock with a coin or screwdriver. Subsequently, the zero setting is countered from below using the zero stop to achieve a stop at the zero position. From the zero position, various shooting distances can be pre-set using a marking system.
Horizontal adjustment with opposing scales
The side adjustment is labeled with two opposing scales. Starting from the zero setting, the wind direction and wind strength, or any potential movement of the target can be pre-set here.
Tactical Mildot illuminated reticle on the 2nd image plane
The Nighteagle V6 5-30x50 Tactical scope features a Mildot reticle standardized at 10x magnification in the ocular image plane (2nd image plane), ensuring it remains the same size during magnification changes.
Even at 30x magnification, the crosshair only covers the target by 1.8 mm at a shooting distance of 100 m, and the field of view at this maximum magnification is still 1.1 m at 100 m. The target optics allow for lightning-fast aiming. The reticle adjusts by 0.1 MRAD per click, which corresponds to 1 cm at 100 m. This results in a point of impact change of about 3 cm per click at 300 m.
Total adjustment range: 165 clicks - 16.5 MRAD (8.25 MRAD per side)
The best illuminated point for backlight / twilight / night vision technology
The fiber optic illuminated point is kept so small that it only causes minimal target coverage. Thanks to the fiber optic technology, the illuminated point of the scope not only becomes darker in strong dimming but also finer. The illuminated point can be continuously dimmed by 100% until it is no longer perceivable by the human eye.
Below level 4, the illuminated point is only visible with a night vision device. Upon request, the illuminated point can be adjusted for use with night vision device types such as Photonis commercial-grade XD4 or XR5 or Gen. 3. When the illuminated point is turned off, the continuous reticle appears as it would in a scope without an illumination unit and is not interrupted by a disturbing, free-standing point. When the illuminated point is activated, neither annoying brightness nor reflections within the optics disturb.
Since the illumination unit is produced by hand, special customer requests can be individually considered.
```