Precise Hunting Clamp Sleeve

The clamping sleeve is intended for mounting on the riflescope. It is slid over a length of 40 mm (or 35 mm for diameters of 30, 34, and 36 mm) over the objective of the riflescope and screwed in place. It remains permanently on the riflescope. The overall diameter for clamping sleeves with an objective diameter of up to 61 mm is 65 mm at the closure ring. A protective film is applied to the contact surfaces of the clamping sleeve to the objective of the riflescope, which prevents damage to the riflescope and increases adhesion to the riflescope. This ensures that the clamping sleeve and thus the attachment device itself are not pulled off the riflescope even with strong calibers. A special internal contour (three-point support on the riflescope) achieves precise alignment of the attachment device to the riflescope. The bayonet on the front side of the clamping sleeve is the basis for a...