Self-trigger for Mod. W2 and Mod. H1

The problem: Often, the self-triggering trap W2 is filled with soil from the back by voles when they are on the opposite side of the trigger in the tunnel. The solution: With our new self-trigger holder, the W2 is simply placed vertically from above into the slightly opened vole tunnel. The trigger ring of the armed device should be positioned about halfway up the tunnel. When the vole tries to pass through the tunnel, it inevitably pushes the trigger ring upwards. This releases the shot and ensures a quick kill. Easy handling, even for beginners, no soiling of the device, and virtually no misfires. Application: Attach the vole self-trigger as shown in the illustration using the supplied clamp with a screwdriver to the self-trigger holder. Partially tension and load the device according to the instructions. Then insert the self-trigger holder horizontally into the ground from above into the vole tunnel. Finish tensioning the device. The trigger ring should now protrude halfway into the vole tunnel. Adjust the height by inserting the self-trigger holder more or less deeply into the ground. Finally, deactivate the device; it is now armed and ready to catch. Unload or remove according to the instructions.