Precise Hunting Adapter for Attachment Devices

Precise Hunting Adapter

Clamp Sleeve
In this solution, a part (the clamp sleeve) is securely screwed onto the daylight optics. The counterpart, the connector, is firmly screwed onto the attachment device. The design of the five locking pins ensures an absolutely repeatable connection between both parts. This achieves the highest repeatability in the alignment of the attachment device to the riflescope. Handling is still simple and can easily be done with gloves in the dark. With the DUO connector, you can use the attachment device alternately on different riflescope diameters without any modifications. This allows for unprecedented flexibility.

This clamp sleeve is slid over the lens for a length of 45 mm and is secured with the 3 screws. It remains permanently on the daylight optics. A protective film is applied to the contact surfaces of the lens, preventing damage to the lens and increasing adhesion. As a result, the clamp sleeve and thus the attachment device cannot be pulled off the riflescope even with strong calibers. A special internal contour ensures precise alignment of the attachment device. The gearing on the front side is the basis for an absolutely repeatable alignment of an attachment device.

Material: This clamp sleeve is made from a single piece of high-quality aluminum and is protected from corrosion by the anodized surface.

Weight: +/- 100g

When mounting thermal imaging/night vision devices on riflescopes, please observe the respective legal situation of the countries!!!