Seissiger solar panel for wildlife cameras

Seissiger Solar Panel for Wildlife CamerasAUTONOMOUS, NEVER-ENDING POWER SUPPLYintegrated lithium-ion battery with 6,800mAhsignificantly extends the lifespan of camera batteriesgentle on the environment and your walletcompatible with all 6V and 12V wildlife cameras that have a 4.0x1.7mm barrel connectorcan be charged via USB-Crobust, weatherproof camouflage housing, protection class IP67Solar power first charges the built-in battery and then any connected battery packseasy installation thanks to included mounting bracket ABOUT THE SOLAR PANELThe SEISSIGER solar panel is an additional power source for wildlife cameras.The solar panel features a built-in lithium-ion battery that is continuously charged by the solar cells when exposed to sunlight. After connecting, the camera is powered as long as possible by the charged lithium battery of the solar panel and only switches to the internal batteries when the charge level of the solar panel's battery is temporarily too low. This significantly extends the lifespan of the camera batteries.Before the first use of the solar panel, we recommend fully charging the built-in battery once at the outlet with a USB-C charging cable (takes up to 12 hours).The solar panel can be used with 12V and 6V wildlife cameras.You will receive two DC output cables, a 12V cable (left) and a 6V cable with voltage converter (right). SEISSIGER cameras use the lower voltage of 6V; many other wildlife cameras operate at 12V and use the left DC cable.To connect the solar panel to the camera, select the appropriate cable. On one side of the cable, there is a thread below the connector. This side belongs in the solar panel. Open the left rubber cover and carefully screw the connector into the internal thread of the solar panel. Please ensure that you do not screw the cable in too tightly, as you could damage the thread on the cable.Finally, connect the camera socket of the solar panel to the input socket for external power supply of your camera (see the user manual of your camera model). Technical Specifications:Power requirement: 5 V @ min 500mAUSB charging voltage: 5V-9VDischarge voltage: 12VMax. discharge current: 2AMax. charging voltage protection: 6VRecommended charging time: 12 hours for full chargeCharging priority: If both USB and solar charging sources are available, USB charging has a higher priority.Operating temperature: -20 to 40°C(Storage temperature: -30 to 70°C)Operating humidity: 5% - 90%Delivery includes: SEISSIGER solar panel, ball head mount including dowels, connection cable for 12V wildlife cameras, connection cable for 6V wildlife camerasDimensions: 16 x 23 x 2.5cm, Weight: 650g