Blaser D99 Duo Standard SHK:3

The Blaser D99 Combination Gun in Standard Configuration Impresses with Its Optimal BeddingIf you manage mixed populations of game and small game in your hunting area, it is obvious to combine a double-barrel shotgun with a stalking rifle to always have the necessary shooting option. With the D99, Blaser has perfected this combination.The BarrelsThe D99 combination gun features two shotgun barrels and an upper rifle barrel. The gunsmiths at Blaser have managed to keep each barrel free of tension directly above the cartridge chamber in the saddle mount, so that their vibration behavior is not affected. This ensures that the point of impact remains consistent even with rapid follow-up shots. The nitriding of the barrels optimally protects them from damage and corrosion. In the standard configuration presented here, the barrel has a length of 58 cm and is equipped with a sight.The Break-Action LockIn addition to the described bedding of the barrels, the break-action lock contributes to the precision of the shots. In the Blaser D99 combination gun, the high strength of the lock guarantees the longevity of your hunting rifle.Cocking and DecockingThe D99 combination gun features a double-trigger system for simultaneous manual cocking, allowing you to take a second shot immediately without re-cocking. The safety system of the over-and-under combination gun is based on relaxed firing pin springs. You can operate the cocking lever almost silently before the shot. If you do not take the shot, you can easily decock and thus secure your rifle.The TriggersThe Blaser combination gun has two triggers.To fire the lower barrels, press the selector switch down; the front trigger fires the shot in the right barrel, and the rear trigger fires the shot in the left barrel.To fire the upper barrel and the lower left barrel, press the selector switch up – a red dot in the selector switch becomes visible – the front trigger fires the shot in the upper barrel, and the rear trigger fires the shot in the lower left barrel.The fine triggers from Blaser have a good reputation – rightly so. The trigger characteristics at the crucial moment before the shot are brilliant and allow for controlled hitting.The SystemThe surfaces of the system are anodized for protection, with attention paid to the environmental compatibility of the process. The sides of the receiver of the D99 combination gun are adorned with an elegant border engraving featuring small arabesques.The StockThe fore-end and buttstock are made from Class 3 wood. The buttstock features a Bavarian cheek piece, while the narrow fore-end has a black finish.MaintenanceFor cleaning and maintenance, you can quickly and easily disassemble the D99 combination gun into its parts and then just as conveniently reassemble it. You do not have to worry about shifts in the point of impact; after sighting in, you will have absolute repeat accuracy.