Powerkit.50 V2 for HDP50 + GEN.2 | RED ELOXIDIZED | Export valve | Maximum power 7.5j - 25j+

The Powerkit.50 V2 promises an additional performance increase by incorporating a hexagonal (drilling 2.5 mm) in the valve pin, allowing the CO² to expand further due to the hexagonal shape. Furthermore, we have enlarged the hole in the valve to 1 mm.
Details | Improvement:

suitable for the HDP50 as well as GEN.2 version

no valve needed in the pressure chamber anymore

Removal of the valve (throttle in the pressure chamber) afterwards:

Valve: press into the pressure chamber with the included screw
PIN: screw in with the included Allen key

Material: Aluminum, RED ANODIZED
Increases the performance to over 25 Joules+ *
longer valve opening time, larger gas volume
reduced cool down effect

*temperature-dependent
Installation can be reversed at any time.
Recommendation:
Since CO2 is very temperature-dependent, we recommend ...