RCBS Full Length 2-Die Set / Case Sizing Die Set 6.5x68 S Gr. D

RCBS Full Length 2-Die Set / Case Sizing Die Set 6.5x68 S Gr. D
The 2-piece RCBS precision die sets consist of a full-length sizing die and a bullet seating die. These dies fit all common presses with a 7/8'x14 standard thread. The seating die with a universal standard seating punch is suitable for all common bullet shapes and can also be used for post-crimping the finished cartridge. Please always perform this work as a separate step. All bottle neck cases must be lubricated for full-length sizing! We also recommend lightly lubricating the inside of the case neck with a good, water-soluble sizing lubricant (no graphite!) to protect the case material. The dies are delivered complete with a decapping pin and thread rings in a sturdy plastic box. Please always order the appropriate case holder separately. For the caliber 6.5x68, you need case holder No. 34, and for the caliber 6.5x68(R), you need case holder No. 65R.