RCBS Full Length 2-Die Set / Case Sizing Die Set 6mm PPC Gr. A

RCBS Full Length 2-Die Set / Case Neck Sizing Die Set 6mm PPC Gr. A
The 2-piece RCBS precision die sets consist of a full-length sizing die and a bullet seating die. These dies fit all common presses with a 7/8x14 standard thread. The seating die with a universal seating plug is suitable for all common bullet shapes and can also be used for crimping the finished cartridge afterwards. Please always perform this work as a separate step. All bottle neck cases must be lubricated for full-length sizing! We also recommend lightly lubricating the inside of the case neck with a good, water-soluble sizing lubricant (no graphite!) to protect the case material. The dies are delivered complete with ejector and thread rings in a sturdy plastic box. Please always order the appropriate shell holder separately.