Hornady Match Grade Die Set 6.5mm Creedmoor

Hornady Match Grade Die Set / Die Set 6.5mm Creedmoor
2-piece die set consisting of a very precise full-length sizing die for sizing bushings, which are available in diameter increments of .001", and a seating die. The sizing die comes with a matching expander and a retaining sleeve for the ejector pin, in case you do not want to use the expander. Sizing bushings from RCBS, Redding, or Wilson also fit. The sizing bushings must be ordered separately. These dies fit all presses with the standard thread 7/8-14 ". Rough determination of the suitable sizing bushing: Measure the neck diameter of a finished cartridge and subtract 0.002"-0.003" from that measurement. Use this measurement to find the suitable sizing bushing. Hornady Match Grade die sets include the following accessories: Full-length sizing die In-Line bullet seating die with micrometer screw Elliptical expander Locking nut for the primer ejector pin Standard seating punch Custom ELD Match bullet seating punch