Ballistol Silencer Cleaner 5 Liter Canister

Ballistol Silencer Cleaner 5 Liter Canister
BALLISTOL Cleaner for silencers and sooty gas pressure systems.

automatically dissolves and neutralizes combustion residues
contains surfactants
gentle on materials
acid-free and odorless
color change as a dissolution indicator
no additional tools required

Particularly non-disassemblable or carbon-made silencers are difficult to clean. Delicate lamellas and rows of holes increase the silencer performance but complicate the cleaning process. With the BALLISTOL silencer cleaner, this is visibly simple. The silencer is sealed from one side with a conical rubber plug. From the other side, the silencer is completely filled with the pure cleaner. The exposure time should be 4-8 hours.

With high shot counts (300-500), an extension of the exposure time is necessary. Heating the silencer and the liquid before use to about 45°C accelerates the exposure time and increases the cleaning performance. After the exposure time, pour out the cleaner and fill the silencer halfway with clear water. Now the silencer should be sealed from both sides. Then shake vigorously. After that, pour out the water and repeat this process as often as necessary until no solid particles are flushed out of the silencer.

The cleaner can also be used in an ultrasonic bath. Common materials are not attacked. We recommend testing compatibility on surfaces in an inconspicuous area.

Danger

Causes serious eye damage. If medical advice is needed, have packaging or label at hand. Keep out of reach of children. Read label before use. Wear protective gloves/protective clothing/eye protection/face protection. IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call POISON CENTER/doctor/…