Steyr Monobloc SHK.:6 leather insert black

With the Steyr Monobloc repeating rifle, the barrel and system sleeve are manufactured from a single piece, setting entirely new standards in terms of precision and warm shot behavior.
The rifle is complemented by Steyr's proprietary stock modular system. In conventional rifles, the barrel is connected to the system sleeve via a thread or clamping method. Steyr's Monobloc completely eliminates the risk of precision-affecting stress in this connection through its single-barrel system. The barrel and system are optimally concentric to each other, and by forgoing a mechanical connection, the system sleeve becomes incredibly slim. The cold-forged, seamless barrel-system unit impresses with its extreme rigidity and thus exceptional precision. Even with high shot sequences, this does not diminish, as the negatively influencing factors of technical connections are fully leveled by the single-barrel system. The ergonomic, modern stock with aluminum bedding rounds off the convincing picture of the Monobloc completely.Set Trigger and Insert MagazineThe set trigger on the stock neck operates exceptionally smoothly and easily. The ergonomic design as well as the short trigger travel of 1 cm benefits every shooter. When the set trigger is in the rear position, the chamber cannot be opened. To open with the relaxed lock, there is a release button located to the right of the lock. The Austrian gunsmith incorporates a steel sheet magazine for four standard cartridges (three Magnum) in the Monobloc. The shifted arrangement of the cartridges in the magazine allows for a pleasantly low construction height.Set Trigger with Relaxation AutomaticThe rifle is equipped with a finely adjusted trigger that releases dry at approximately 580 g. Additionally, Steyr incorporates a set trigger that allows the trigger weight to be reduced to 200 g. If the set trigger is pulled back while the trigger is engaged, the Monobloc automatically discharges (with the chamber not opened). The entire trigger unit can be swung out of the stock with a simple push of a button.BarrelThe barrel of the Monobloc is manufactured in a length of 51 cm. The entire single-barrel system unit measures 69 cm and is standardly equipped with an M15 x 1 muzzle thread with a cover cap. The system sleeve and barrel are coated with a matte black, corrosion-resistant, and highly scratch-resistant DLC coating.StockSteyr's Monobloc features a real wood stock in quality class 6 with distinctive black leather inlays. These can be easily removed without tools with just a few hand movements, allowing for simple replacement in case of wear or damage. The stock impresses with its modern, ergonomic shape, with a steep pistol grip and deep engagement. The back of the stock rises and directs the recoil away from the face. Even with bright, higher-mounted scopes, the cheek contact with the soft, dampening cap remains optimally preserved. The leather inlay on the fore-end provides maximum stability in the rest due to its flattened design.Caliber: .308WinIncluded in delivery: Plastic transport case, warranty certificate, operating instructionsTechnical data:

Type of weapon: Repeating rifle
Trigger: Combination trigger, fine trigger with set trigger
System surface: DLC coating
Safety: Set trigger system
Barrel length: 51 cm
Sighting: none
Barrel surface: DLC coating
Magazine capacity: 4+1 magazine
Stock material: Wood class 6
Stock shape: Hunting stock with pistol grip
Overall length: 102.5 cm