Blaser R8 bolt right chamber gold-colored / wooden ball

The Blaser R8 straight-pull bolt attaché is enhanced with a titanium-nitrided, gold-colored trigger and chamber head, as well as an elegant wooden chamber grip ball.
The Blaser R8 straight-pull bolt consists of a bolt carrier and a bolt head and is fired with up to 8000 bar! The extremely strong, uniformly supporting radial locking bolt locks directly in the barrel – without any rotational movement. The manual cocking safety system is considered one of the best safety systems. No other mechanical safety can provide the security of a relaxed firing pin spring. The R8 is intentionally and immediately cocked before the shot by simply pushing the cocking slider forward. To relax the system again, a light pressure on the cocking slider is sufficient – and it glides back. At the same time, the weapon cannot be unintentionally opened, as the chamber grip is blocked when the bolt is relaxed and locked. To unlock it, a light tap on the cocking slider and simultaneous withdrawal of the chamber grip is enough. The rifle is not cocked during this process.

The chamber head can be exchanged depending on the respective caliber group, i.e., the caliber used. Blaser distinguishes between different caliber groups: .22 LR, Mini, Standard, Medium, and Magnum.

So, for example, if you switch from a standard caliber to a medium or magnum caliber, you only need to change the chamber head on the Blaser R8 and not the entire bolt. If you stay within a caliber group when changing calibers, you only need to change the barrel. There are also special bolts and chambers for left-handed shooters. With the various bolt options, each Blaser R8 repeating rifle can be configured individually. There is also the possibility to combine, for example, a right-handed stock with a left-handed bolt. The bolts are usually blued black just like the chamber head.