








Pulsar Krypton 2 FXQ35
Thermal imaging attachment with a 35mm lens and a sensor
384x288 pix. @ 17 m (NETD <25 mK) The new Krypton 2 FXQ35 now comes as the little brother to the Pulsar Krypton 2 FXG50. The completely newly developed housing is immediately noticeable, and similar to the Proton, there is a slight offset upwards. This creates a bit more space between the device and the scope, allowing it to be mounted even on very flat mounts. The battery is now located on the top, which leads to better balance. The controls on the left side are ideal for right-handed hunters, but this is somewhat disadvantageous for left-handed users. In this case, the remote control would be very suitable, thus shortening the long reach to the front for the attachment device.
Compact and Balanced DesignWhen hunting, every additional gram of equipment counts. Krypton 2 is simple and convenient to use. With its short length, low weight, and even weight distribution, the attachment has minimal impact on the balance of the "weapon optics" complex when mounted on the objective lens of an optical riflescope, with the controls of the attachment easily accessible.
Robust housing made of magnesium alloyThe robust, lightweight housing made of a magnesium alloy has high structural strength and protects the Krypton 2 from recoil and vibration stresses. It is resistant to external mechanical, temperature-related, and climatic influences. The magnesium alloy housing dissipates heat from the electronic components of the thermal imaging camera, thereby increasing the operational stability of the device.
Highest energy performance. Up to 11 hours of operation on a single chargeThe quickly replaceable and quickly rechargeable Li-Ion battery pack IPS7 provides enough energy for up to 11 hours of continuous operation. With one battery pack, the device can run all night without needing to be replaced. Quick release and wireless design, long operating time are the great features of this high-performance instrument.
Quick conversion from clip-on to 3x thermal imaging monocularJust a few seconds and the new compact Pulsar 3x20B monocular is enough to transform the Krypton 2 into a 3x thermal imaging device. With the connection closure, the Krypton 2 can be quickly and easily converted from a thermal imaging attachment to a thermal imaging monocular and back again in field conditions.
Ergonomic Bluetooth Remote ControlThe wireless Bluetooth remote control Pulsar BT fully duplicates the buttons on the device. The remote control features excellent ergonomics - the buttons activate the most frequently used functions, while the device parameters for fine-tuning and menu navigation are selected by turning or pressing the encoder. The design, size, and positioning of the buttons and the rotary encoder are designed to be operated with both bare hands and gloves. When the remote control is mounted in a convenient location on the fore-end or on the rifle stock, a hunter only needs a few movements to adjust the device and can fully concentrate on the hunt.
Adaptive User InterfaceA new feature for Pulsar thermal imaging attachments is the adaptation of the graphical user interface. The positions of the menu and the instrument's status bar are scaled by the user to a convenient view by changing the magnification of the day scope to see the current information about the status of the attachment and to work with the menu at a wide range of magnifications.
Multicolor Full HD AMOLED DisplayThe new FHD full-color AMOLED display features high contrast, a wide dynamic range, and energy savings. The fast response time ensures a clear and fluid image when observing during movements or in freeze frames.
Technical Data
Sensor: 384x288 pix. @ 17 m (NETD <25 mK)
Objective Lens: F35 / 1.0
Detection Range, m: 1300
Sensor
Type: uncooled
Resolution, Pixels: 384x288
Pixel Pitch, m: 17
NETD, mK: <25
Frame Rate, Hz: 50
Optics
Objective Lens: F35 / 1.0
Field of View (HxV), Degrees / m @ 100 m: 10.78 / 18.7x14
Recommended Magnification of Day Scope, x: -
Recommended Magnification of Day Sight, x: 2 6
Display
Type: AMOLED
Resolution, Pixels: 1920x1080
Observation Distance
Observation Distance, m: 1300
Video Recorder
Video / Photo Resolution, Pixels: 1244x934
Video / Photo Format: .mp4 / .jpg
Built-in Memory, GB: 16
W-LAN
Wireless Connection: Wi-Fi
Standard: IEEE 802.11 b/g/n/ac (WPA)
Frequency, GHz: 2.4 / 5
Bluetooth
Wireless Protocol: BLE 4.2
Wireless Standard: IEEE 802.15.1
Frequency, GHz: 2.4
Environmental Features
Protection Class, IP Code (IEC60529): IPX7
Operating Temperature Range, : -25 +50
Connections and Compatibility
Max. Recoil Force on Drawn Weapon (Eo), Joules: 6000
Resistance of Smoothbore Barrels, Caliber:12
Remote Control: Pulsar BT (included)
Supported Application: Stream Vision 2
Power Supply
Output Voltage, V: 3.0 4.2
Battery Type: IPS7 Li-Ion Battery
Battery Type, mAh: 6400
Operating Time on Battery (at t = 22 C), h *: up to 11h
External Power Supply, V: 5V, 9V (USB Type-C Power Delivery)
Weight & Size
Housing Material: Magnesium Alloy
Dimensions, mm: 116x73x83
Weight, kg: 0.3 (without battery) / 0.44 (with IPS7 battery)
Scope of delivery:- Krypton 2 FXQ35
- 1x battery
- Charging station incl. cable and power supply
- Remote control
- Cleaning cloth
- Description
- Bag
- Warm pads
- Adapter optional
Please remember that we need the housing outer diameter and not the lens diameter of the optics!
When mounting thermal imaging devices on riflescopes, please observe the respective legal situation of the countries!!!
| ID | 8421387 |
| URL | https://www.gunfinder.com/items/8421387 |
| Category | Optics / Thermal Imaging Attachment Devices |
| Condition | Neu |
| Location | 09619 Mulda/Sachsen, Germany |
| Availability | In stock |
| Shipping costs paid by | Buyer |
