BASIC COMBAT PRO S&W 686 4" inches 357 Magnum

NEW BASIC COMBAT @ BASIC COMBAT PRO S&W 686 4" inches 357 Magnum @ Smith & Wesson 686- Professional Custom " BASIC COMBAT PRO" More images see below: ... Quality & luxury in perfection that leaves no wishes unfulfilled... from the Shooters Shop Exclusiv Edition: "BASIC COMBAT PRO" Weapon futures & tunings: Model: S&W 686-1 Serial-Number: AUP83"xx" Cylinder: optimal fit, minimal play, perfect "timing" caliber .357 Magnum Cylinder/Capacity: FLUTED cylinder, Satin-Stainless-Steel, 6 chambers, caliber .357 Magnum, satin cylinder finish in the area of the "Cylinder-Stop" with fine grinding (this avoids unsightly, unfortunately always visible and unavoidable scratches caused by the cylinder stop) Cylinder crane: Double-Ball-Carne-Lock (two spring-loaded balls in the cylinder crane additionally lock in the frame, providing better hold and fit of the cylinder in its position) Barrel: optimized and polished barrel transition cone, 4"-inch barrel length Frame: Mod.: -1 = tried and tested drop-forged frame (firing pin is integrated in the hammer / Square-Butt) Cylinder-Release: Orig. S&W cylinder opening lever "Old-Style" Material/Finish: entire weapon in Satin-Stainless-Steel Sight facilities: "LPA-TXT03-F1" match sight silver: The LPA-TXT03-F1 features fiber optic inserts (two inserts-green) at the rear sight. These bundle the light and allow for quick, safe, and bright target acquisition even in poor lighting conditions or at dusk. Ideal also for tracking weapons as it is usually dim or even dark during tracking. With the illuminated inserts, you achieve maximum light utilization and can shoot safely and quickly. With a superior sight picture and optimized handling comfort, these sights were specifically developed for competitive shooters, hunters, and security services. This sight harmoniously integrates into the attractive appearance of your S&W revolver and is a high-quality, solid sight with fine and precise height and windage adjustment. Made by Centra Germany!! Front sight: LPA illuminated front sight with red fiber insert Trigger: the adjustable trigger stop is integrated into the frame of this weapon, complete lock/mechanism has been cleanly worked over/tuned, SA & DA: trigger stands absolutely dry, clear smooth break (SA) at approx. 1100 grams (setting via digital trigger scale), butter-smooth lock travel Barrel length/caliber: 4" inches, caliber: .357 Magnum, Satin-Stainless-Steel Weight: 1155 grams (unloaded) Delivery: including S&W box "blue", operating instructions "German", 2 additional Wilson trigger springs "13 & 14" as well as spare illuminated inserts for the LPA sight! Warranty: We guarantee 2 years warranty on this weapon Grip: Nill-walnut grip Mod: SW047, stamped, without finger grooves, with wide thumb rest for RIGHT-HANDED SHOOTERS Further grip description: SW047 utility revolver grip with closed back - symmetrical - without finger grooves - rounded back - thumb rest for right-handed shooters This ergonomically shaped NILL-GRIP offers optimal hold for average to large hands. The slightly wider and rounded upper end in combination with the closed back makes shooting even with strong loads a pleasure. For calibers over .357 Magnum, the choice of a smooth grip is recommended, as this allows the weapon to glide easily in the hand, thus better and more hand-friendly absorbing the recoil forces. Grip panels without finger grooves fit any hand. Those who shoot with short-barreled revolvers should opt for a NILL-GRIP with a round back, as this allows for optimal handling of the weapons. Brief description of the weapon: A 686 S&W revolver with complete professional basic tuning in caliber .357 Magnum in the most noble Stainless-Steel-Satin-Finish, 4" inch barrel, LPA-TXT03-F1 illuminated dot match sight silver, LPA illuminated front sight with red fiber insert. An adjustable trigger stop is integrated into the frame. Nill-walnut grip Mod: SW047, stamped, without finger grooves, with wide thumb rest for RIGHT-HANDED SHOOTERS. Original S&W OLD-STYLE cylinder release (cylinder opening lever) The finely worked lock with SA & DA tuning to a trigger weight of dry 1150 grams (SA) ensures the best shooting behavior and minimizes "pulling". A weapon from the highest quality manufacturing years that Smith & Wesson has ever had, a model from the production series -0 to -4; this means that the frame, hammer, trigger, interior, and the frame still consist of drop-forged parts and not, as in today's production, from die-cast parts! The firing pin is integrated in the hammer and not embedded in the frame! In the newer versions, most parts are pressed from metal powders (sintering technology), which is cheaper and faster in production, but not better! The weapon is subject to differential taxation according to § 25a UStG and does not include VAT! IMAGES: