Sight-Mark Adjuster Laser Cartridge for Cal. 223Rem, 222Rem, 6x47, 5.6x47

@ Justier Laser Cartridge SIGHT-MARK Laser Bore Sight Insertion Aid Cal.: 223 Rem 222 Rem 6x47 5.56x45 & 5.6x50 @ More images see below: The original...Sight~Mark...The original Laser Cartridge "Laser Bore Sight" for calibers: 222 Remington, 223 Remington, 6x47mm, 5.56x45mm and also for 5.6x50mm! ~NEW ITEM DIRECTLY FROM THE USA~... with us, you hit the "BULLSEYE"... You are bidding on: A "SIGHT-MARK" Laser Cartridge suitable for the calibers: 222 Rem., 223 Rem, 6x47mm, 5.56x45mm and also 5.6x50mm! A laser cartridge for many calibers! Delivery includes battery pack and Cordura storage bag as well as instruction manual (English) and test target. You want to sight in your scopes but don't want to waste expensive ammunition... with the Sight-Mark LASER CARTRIDGE you save valuable time at the shooting range and also spare your wallet. You simply insert the switched-on laser cartridge into your chamber (it can also be fed through the magazine) and look through your scope. Where the laser dot hits your target is the theoretical impact point of the bullet. Now simply adjust your scope using the elevation and windage adjustments to center the crosshair on the laser dot. A test shot follows and the fine adjustment of your scope based on the hit result. DONE. Of course, you can also use the laser cartridge for "dry practice" or to check the point of impact of firearms that have not been used for a long time. Play it safe and just make a laser test shot at any target. Precise and accurate # Easy handling # Light and compact # Includes carrying bag and battery pack # Safe and noise-free # Spares your wallet # Saves precious time and expensive ammunition Features & Technical Data: Laser wavelength 632-650nm -red-LED/Laser- Type: Visible Red Laser Class IIIa Power < 1 mW Usable battery types: (AG5) (SR48) (AG3) required: 2 pcs 2 pcs 3 pcs Battery life under continuous load: 1 hour Range (visible) approx. up to 100 meters Laser dot size at 100m distance: Laser dot size at 10m distance: approx. 5 cm diameter approx. 0.5 cm diameter Function: on/off cap Material: Solid brass Temperature operating range: -10 degrees to +40 The laser remains on as long as the battery cap is screwed on (ON position).