Blaser QDC+ quick adjustment (turret) - for B2

Blaser QDC+ Quick Adjustment (Turret) - for Blaser Scope B2

Availability and current prices at: Click

Product Description:
With this tool, you can select the QDC+ quick adjustment ring for your Blaser scope suitable for your weapon and ammunition.
Simply select your Blaser scope and your ammunition from the menu. The program then calculates the trajectory and provides you with the appropriate ring for your QDC+.
To achieve even more accurate results, all input values (scope height, altitude, temperature, humidity, muzzle velocity, and ballistic coefficient) can be overwritten and thus individually adjusted.
In particular, it is recommended to measure the muzzle velocity of the respective load on your own rifle and enter the measured value. By entering the muzzle velocity and the ballistic coefficient, the appropriate ring can also be selected for ammunition not listed in the menu.
If you already have trajectory data, you can enter it directly under "Use Measurements." You can either enter the bullet drop in cm at the respective distance or the number of necessary clicks at the respective distance. The result will be calculated up to the farthest distance for which values have been entered.
As a result of the calculation, you will receive a recommendation for the appropriate ring, a representation of the ballistic curves of the 10 available rings with the trajectory of your ammunition, and a table with the trajectory data. This table notes the maximum deviation of the calculated trajectory from the recommended ring in centimeters on the target at the respective distance. This allows you to assess up to what distance the chosen ring accurately represents the actual trajectory to hit the target reliably.
Caution: Please always verify the result through test shooting with the chosen ring before hunting and note that the practical effective shooting distance may be limited by various factors.
Data Sheet:

Brand: Blaser
Variants:
Blaser QDC + for Blaser Scopes B1
Blaser QDC + for Blaser Scopes B2
Manufacturer Article Number: 80109488 | 80111145

Scope of Delivery:

Blaser QDC + (rings)
Tool
Instruction Manual

Miscellaneous: More information at: https://hs-arms.de/Blaser-QDC-Schnellverstellung-Turm-fuer-B2

More products at www.hs-arms.de.

Financing available!

Shipping only within Germany! Shipping abroad is possible for an additional charge.
You are welcome to view or pick up this offer in our store in Heidenau.

You can reach us by phone: 03529 5844 917 or by email: [email protected].

up to 30kg = https://hs-arms.de/Versand
PICKUP = FREE
Product Safety Information: This product was made available on the marketplace before 13.12.2024. For manufacturer and safety information, please contact the offering dealer.
WARNING: The presentation of the acquisition authorization is required for the purchase of this product!!!