Nite Site Spotter RTex XW 3-IR-LED Range: 300 meters

The NiteSite is based on infrared LED technology and is therefore not visible to the naked eye. The systems are powered by lithium-ion polymer batteries. The NiteSite RTEK Spotter X system transforms your spotting scope into a fully functional night vision device that is quick and easy to use. Setup takes only a few minutes. Suitable for use with any spotting scope with sharp images. No ambient light is necessary. The IR frequency of 850nM and the 3.5" (8.9 cm) display can be used both during the day and at night. Recording works at the push of a button with WiFi sharing function. All NiteSite RTEK Spotter X models are attachment modules designed exclusively for use on an existing spotting scope. These can also be used during the day. When used at night, the NiteSite achieves a night vision range of up to 500 meters, depending on the model, current weather conditions, and the spotting scope used.

3.5" (8.9 cm) LCD screen with integrated IR LED illumination module
LED illumination frequency 850nM. 3-pin connection cable with angled plug. XV, XW, XW Power+ & XE models have different IR illumination strengths!
Camera module: Color infrared camera 1.0 LUX 650TVL 1/3 CCD CMOS chip PAL or NTSC 4:3 scale. The RTEK camera module can record using an SD card. With the WiFi sharing function, the camera can connect to an iOS or Android device and transfer recordings. The RTEK camera features a dial that allows for quick and easy focusing. 12 Volt power socket. The on/off switch is located on the opposite side. Mounting clamp designed for use with all common lens sizes. Mounting clamp made of robust plastic with rubber coating on the inside of the clamp. Attachment to the spotting scope using adjustable Velcro strap.
Battery: All NiteSite systems are supplied with a lithium-ion battery in a polymer housing as standard. The battery must be charged before first use. Disconnect the battery from the charging cable only after it has been fully charged. The XW and XV models are equipped with a smaller and lighter battery.
Battery charging unit: 12 Volt charging unit for lithium-ion battery with charge level indicator. The charging process is indicated by a red LED. Once the battery is fully charged, the LED lights up green. Use the battery only with the supplied charging cable.
Mounting clamp for flashlights (optional). The standard mounting clamp is available with a diameter of 25 mm. See page 12 for a detailed description. A universal mounting clamp is offered for other sizes.
Eyepiece sleeves: Two flexible sleeve sizes allow for a snug fit of the camera module to the eyepiece. For eyepiece diameters over 44 mm, it is advisable to dip the sleeve in hot water before attachment to make the material more flexible.
Micro SD card is included with each RTEK camera module and provides you with up to two hours and twenty minutes of recording time.
No warranty! No returns!
Product safety information: This product was made available on the marketplace before 13.12.2024. For manufacturer and safety information, please contact the offering dealer.
WARNING: The presentation of the acquisition authorization is required for the purchase of this product!!!