Table Compressor EVO 310

Hill EVO 310 electric air compressor for cartridges
The evo has a number of changes and improvements in the operation of the compressor, including some great new features that make the Hill compressor even more reliable, durable, and user-friendly. Hill has incorporated an automatic air purge. This activates whenever the compressor's motor stops, that is, when it enters a cooling cycle and when a filling is paused or completed. This not only relieves the motor when it restarts at very high pressure but also has the added benefit of flushing air, including moisture, out of the inside of the device. This is very important for users who fill larger rifles and/or bottles.
Hill has installed a new, high-precision digital pressure sensor with an additional analog manometer that is extremely accurate, but also means that you no longer need to recalibrate the compressor during major maintenance. The evo can be set to a pressure of 50 bar (755 psi) and up to 310 bar (4500 psi).
Some features of the EVO 310

patented innovation
CE certified with built-in fuse
the quietest compressor on the market, operates at only 75db
fast filling
Air pistols approx. 1 min and air rifles approx. 3 min from 0 to 250 bar
Can fill cartridges from 200 to 300 bar, with automatic shut-off (DIN adapter for use with filling adapters such as Anschütz, FWB, Walther, Steyr, Morini is included)
fully automated filling times from 0 to 250 bar:

Air pistol approx. 1 min
Air rifle cartridge 250 cc approx. 3 min
large air rifle cartridge 500 cc approx. 6 min

Please note! The Hill EVO 310 is not designed to fill 10-liter bottles. Refill times from 100 to 200 bar:

Pistol cartridge approx. 30 sec.
Rifle cartridge approx. 90 sec.
Small bottle 500cc approx. 3 min

This Hill compressor was designed by Hill Pumps in Sheffield, England, to fill rifle cartridges and small bottles (no 10-liter bottles). The EVO 310 is patented and has international design protection. It is CE certified, marked, and produced under BSI ISO 9001 standards.