Ballistol Cold Degreaser - 50ml Spray

Removes oils and fats during cleaning.
Contains no aromatic hydrocarbons and no nitro solvents.
Ideal for cleaning before assembly or bluing.

The effective grease remover.

Ballistol Cold Degreaser removes oil, grease, and dried, hardened oils from all metals and plastic parts.
Ideal for pre-treating metal surfaces when bluing or galvanizing.
Or simply to remove unwanted grease residues or adhesive residues.
Ballistol Cold Degreaser is ecologically neutral; its components are broken down in nature through photo-oxidation.

Application: Depending on the degree of oil contamination, apply Ballistol Cold Degreaser several times with a brush to the part to be degreased and then wipe it off.
Finally, thoroughly wet the grease-free area with the dripping brush and let excess Ballistol Cold Degreaser drain off.
After drying, the area is grease-free, and subsequent treatment can be carried out.

Available in:
50ml
200ml

Type: Spray

Danger!
Extremely flammable aerosol. Container is under pressure: may burst if heated. Causes skin irritation. May cause drowsiness and dizziness. Toxic to aquatic organisms, with long-lasting effects. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not pierce or burn, even after use. Use only outdoors or in well-ventilated areas. Protect from sunlight and do not expose to temperatures exceeding 50 °C. Dispose of contents/container to recycling.