Zippo Zippo replacement wick for lighters

The Zippo replacement wick for Zippo lighters is the ideal solution when your lighter no longer ignites properly. The wick should be replaced when the ignition process needs to be repeated multiple times. With this high-quality replacement wick, you can quickly and easily get your Zippo lighter back in operation. Procedure: 1. Remove all components of the fuel tank (flint screw, felt cap, cotton, old wick). 2. Pull the new wick either from top to bottom through the chimney or from the bottom through the fuel tank. 3. Bend the wick tip over the chimney to hold the wick in place during reassembly. 4. Reinsert the cotton pieces in exactly the same order they were removed. When inserting, thread the wick in an S-shape through the cotton pieces to ensure the wick has as much contact with the filling material as possible. 5. Place the felt cap back on the flint tube and secure it with the pressure spring. Make sure that the flint does not fall out during this process. 6. Cut the wick at the edge of the chimney and reinsert the insert into the housing. - Contents: 1 x replacement wick