Precise Hunting Adapter Clamp Sleeve 30mm Duo Connector Accessory Night Vision Technology

Multi – Adapter In this solution, a part (the clamping sleeve) is firmly screwed onto the daylight scope. The counterpart, the connector, is firmly screwed onto the attachment device. The design of the five locking lugs creates an absolutely shot-proof and repeatable connection between both parts. This achieves the highest repeat accuracy in the alignment of the attachment device to the riflescope. The handling is still simple and can easily be managed even with gloves in the dark. With the DUO connector, you can use the attachment device alternately on different riflescope diameters without any modifications. This allows for unprecedented flexibility. This clamping sleeve is designed for mounting on a daylight scope with a 30 mm outer diameter on the objective housing. It is slid over the objective for a length of 45 mm and screwed in place with the 4 screws. It remains permanently on the daylight scope. A protective film is applied to the contact surfaces to the objective, which prevents damage to the objective and increases adhesion. As a result, the clamping sleeve and thus the attachment device cannot be pulled off the riflescope even with strong calibers. A special internal contour ensures precise alignment of the attachment device. The serration on the front side is the basis for an absolutely repeatable alignment of an attachment device. This clamping sleeve is made from a single piece of high-quality aluminum and is protected from corrosion by the anodized surface. We expressly point out that in Germany, the mounting of an attachment device on a riflescope is only permitted with the appropriate authorization. Please consider the legal situation of the respective country here.