EDCX EDCX Firestarter Keychain Lanyard Lizzard - Coyote

The fire starter keychain Lizzard hides a flammable cord with fire steel in a stylish exterior. It is water-repellent and easily ignitable, allowing you to start a fire in survival situations even without accessible ignition material. The lanyard can be worn as a catch cord on a knife, on the keychain, as decoration on a backpack, or on the belt. Procedure: 1) Prepare firewood: You can chop the wood with the Kevlar saw using even pulling movements and bundle it with the rope for transport to the fire site. 2) Unravel the keychain: Open the braid at the bottom end and remove the flammable thread. Simply cut off the keychain and tie it back together. 3) Prepare fire: Free the flammable cord from the parachute cord bracelet and fluff it up until it lies in a small bundle on the tinder. 4) Remove protective layer: The protective layer on the fire steel must be scraped off before use to create a spark. 5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are generated. 6) Fire: With these steps, you can easily ignite a fire even in a forest with damp wood. Dimensions: - Total length: 17 cm - Braided length: 9 cm - Cord: 1.2 m