MD-Textil MD-Textil Tactical Belt Jed Belt incl. Reinforcement - Black / 80-90

The MD-Textil Einsatzgürtel Jed Belt including stiffening was made from high-strength special yarn "Made in Germany" and is therefore a high-quality and reliable accessory. Since the D-ring is integrated directly into the buckle, both fasteners must be operated to open the belt. This ensures that it does not accidentally break under load. The webbing is doubled and treated with resin. This achieves a good balance of strength and wearing comfort. Thanks to the hook-and-loop fastener on the inside, the excess length can be easily rolled up and secured. Between the webbing layers is a plastic insert. This construction makes the Jed Belt extremely torsion-resistant, and holsters or pouches with handguns or other equipment cannot slip. Finally, it impresses with an extremely high load capacity of 3100 kg. With approx. 43 mm width, it can be worn with almost any duty pants. - 100% handmade in Germany - Original Cobra-Buckle 7075 CNC milled safety buckle, breaking load in the ring 18KN - Class 7a safety webbing with a breaking load of 2700 kg according to MIL-W-4088 To determine the size, please proceed as follows: Wear pants that you usually use with the belt in service or everyday life. Pass a tape measure through the belt loops of the pants and read the circumference. If you want to wear the belt over clothing or as a battle belt, place the tape measure at the corresponding spot. If you want to wear the belt as a system with an under belt, please order one size larger to compensate for the circumference difference of the under belt.