Regulator Benjamin Marauder Armada .25 HUMA

Regulator Benjamin Marauder , te gebruiken zonder de buis verder te hoeven aan te passen. NB inbouwen uiteraard op eigen risico. De standaard setting staat op 140 bar, deze kunt u eventueel zelf wijzigen. Download de instructie via deze link van Huma:

http://foto.huma-air.com/foto/installation-guide-marauder-2.2.pdf

Op bestelling zijn ook regulatoren verkrijgbaar voor de:

Air Arms S4xx / S5xx basic instuctions

Air Arms S200 internal regulator

Air Arms EV2-FTP900-Pro Target regulator

BSA SE models

BSA ultra/scorpion/hornet steel MMC regulator

BSA vented non drill internal regulator for Lonestar / scorpion / hornet / techstar / sportsman

BSA R10

BSA Buccaneer

Brocock Compatto

Benjamin Marauder

Benjamin Discovery/Maximus/ Marauder Pistol

Daystate Wolverine

Evanix Sniper K

FX airguns

Gamo Coyote

Gamo Dynamax vented non drill internal regulator

Hatsan AT44 / BT65 / Gladius / Galatian

Jkhan Noblesse

Spa P12

Spa M10 

For the Benjamin Marauder we have a pressure regulator with a combined pressure gauge connection that can be pushed into the pressure tube.  It will give you a better shotcount and a full flat shotstring immediately. The pressure gauge can be screwed inside the regulator body and will indicate the regulated pressure.

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations

A constant pellet speed over the full working pressure range.

It will give you a better shotcount and a full flat shotstring immediately.

Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Often the rifle will make less noise due to better balance in air usage

Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.

It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

When you order one of our regulators you will receive:

Your regulator preset on to your own wishes;

A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;

We will include a “Huma regulated” breech sticker;

Fitting instructions as pdf download

Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.

To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.

We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Before ordering a regulator:

Please make sure, you have made yourself familiar with the fitting instructions on our website, you are happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal.