6.5x70R Triebel Neck Sizing Die for 7/8" Special Order

The Triebel neck sizing die is designed for use with sizing rings made of hardened tool steel and comes ready to use with a standard insert. Additional inserts are available in various diameters. By selecting the sizing diameter suitable for your cartridges, you can achieve optimal sizing. This significantly increases the lifespan of your cases. With neck sizing dies, only the case neck is sized enough to ensure the bullets fit firmly when seating. The case body is not or only minimally sized (for cartridge chambers where the cases expand slightly more). This provides the advantage of better accuracy and a longer case life, but the sized cases can usually only be loaded into the firearm from which they were previously fired. The neck sizing die sizes the fired cartridge case only at the neck. The die body has the internal contour of the cartridge chamber. The neck sizing die consists of the die body, the spacer bushing, the 2mm spacer ring, the spindle with the internal expander, nut and locknut, and the ejector pin with lock nut. External sizing occurs when the cartridge case is pushed into the die. Internal sizing of the case neck occurs when it is pulled out of the die. This achieves a firm bullet seating. The case holder should rest against the die. All reloading dies from Triebel Waffenwerkzeuge GmbH impress with extremely precise workmanship and numerous adjustment options. Added to this is the straightforward and readily available customer service. Numerous precision-conscious reloaders trust the first-class dies from Stöttwang. The die has the usual 7/8" - 14 thread. A link to the user manual can be found here: Link to description