.260 Remington Triebel Full Length Sizing Die 7/8"

The full-length sizing die resizes the fired cartridge case from the case neck to the base area (P1) in diameter. The Triebel full-length sizing die consists of the hardened die body and the spindle with the inside expander and the ejector pin. The die body is hardened, and the internal profile is mirror polished. The inside expander is made of tool steel, hardened and finely ground. The complete spindle can be removed upwards, so that no readjustment is necessary when reinstalled. The outside sizing occurs when pushing the cartridge case into the die. The sizing of the case neck from the inside takes place when pulling it out of the die. This restores the case’s loading capability and achieves a firm bullet seating. The correct position of the die in the press is set with the lock nut. All reloading dies from Triebel Waffenwerkzeuge GmbH impress with extremely precise workmanship and numerous adjustment options. In addition, there is an uncomplicated and readily available customer service. Numerous precision-conscious reloaders trust the first-class dies from Stöttwang. The external thread on sizing dies as well as bullet seating dies is either the usual 7/8" - 14 thread or, in the reinforced version (for heavy calibers), 1¼" - 12 thread. This allows the dies to be used in common reloading presses; for 1¼" - 12 thread, a threaded bushing can be removed on heavy presses (e.g. Turban-CNC Präzipress). A link to the user manual can be found here: Link zur Beschreibung