GRIPS KMR S DOTMATRIX ERGO ALU | CZ / KMR S-02

Specifications:

Size: long

Material: anodized duralumin

Pattern: golf ball

Usage: without magazine guide

Package included: torx screws

Logo: KMR

Explanation of frame designation S-02, W-02, L-02

KMR pistols are available in 3 frame designs.

S-02: KMR S-02

W-02: KMR CUDA, UMBRA

L-02: NMR SPECTRA, ORCA, UMBRA

The KMR S-02 in .22 LR has a steel slide and an aluminum frame. The aluminum frame is 26 mm wide. Matching grips are exclusive to the KMR S-02 version and are not compatible with W-02 and L-02 frame sizes.

The KMR W-02 CUDA and W-02 UMBRA models have a steel frame with a width of 27 mm. Matching grips are exclusively the KMR W-02 version and are not compatible with S-02 and L-02 frame sizes.

The KMR L-02 SPECTRA and L-02 ORCA models have a steel frame, the L-02 UMBRA model has an aluminum frame. All L-02 models have a 27mm wide frame. The matching grips are exclusively the KMR L-02 version and are not compatible with S-02 and W-02 frame sizes.

The KMR L-02 ORCA model has a magazine funnel and high capacity magazine and requires a special L-02 grip frame model that is narrower inside and also shorter overall. Matching grips are exclusively KMR LP versions and are not compatible with L-02, S-02 and W-02 frame sizes.

W-02 and L-02 frames are both 27mm wide. The W-02 frame is approximately 1 mm shorter than the L-02 frame in the grip area (when viewed in the direction of fire).

All grips are marked on the inside (L, W, S, LP).

Die Griffschalen haben auf der Innenseite einen Typen-Code.

Für CZ und KMR S-02 Pistolen: KMR-S-L (linke Seite), KMR-S-R (rechte Seite)