UTG PRO MOUNT RINGS ALU PICAT DM 34 BH HIGH/20 MM

UTG PRO MONTAGERINGE ALU PICAT DM 34 BH HIGH/20 MM

• 
Proudly Designed and Made in USA

• 
High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective

• 
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations

• 
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width

• 
Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms

• 
Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize

• 
UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size