Blaser R8 BARONESSE

The Blaser R8 BARONESSE flaunts all the design elements of a top-tier rifle.

Blaser R8 BARONESSE
Technological perfection and the art of engraving in a harmonious symbiosis. The Blaser R8 BARONESSE flaunts all the design elements of a top-tier rifle.

Deer

Chamois

Wild boars

Roe deer

Here you find a PDF document with an overview of all calibers, diameters, barrel lengths, and profiles available:
View/Download PDF document

Golden trigger

The bolt head coated with titanium nitride gives the firearm a particularly refined accent.

Reduced weight
Better heat dissipation

Weapon cocked = illuminated dot active

Illumination Control (iC) combines targeted illumination control with weapon operation
A sensor in the eyepiece recognises the position of the cocking bolt and autonomously controls the activation and deactivation of the illuminated dot.

Stock with Bavarian cheekpiece and double groove

 
 

Reduces recoil effect on the shoulder
The weapon can be rested quietly and without risk of slipping

Fore-end tip in precious black ebony

 
 

Made from the stock wood

Type B: For repeating rifles with barrel up to 70 cm, stock up to 38 cm length
Compartments: For 1 scope (objective diameter up to 56 mm),
1 spare R8 magazine
Compartment for documents and hex key holders in the lid
Combination lock
L x W x H: 82 x 33 x 11 cm

Wide and soft shoulder pad for optimal carrying comfort. Non-slip, elastic, and length adjustable. Integrated housing for two cartridges. Removable sling with quick release.

Bolt, breech chamber, and stock are also available in left-handed versions

“Diamond Like Carbon” – glossy black

Engraved with gold inlay

Engraved with fish scale knurling

With gold inlay

“Diamond Like Carbon” – glossy black

For all R8 models, a Jagdmatch barrel can be chosen, also as a replacement barrel.
Ø 22 mm

Ø 19 mm
Weight about 300 g higher than the standard barrel (depending on barrel length and caliber)
Optional fluting

For all R8 models, a barrel without sights can be chosen, also as a replacement barrel.

For quick shooting even at short distances
White triangular rear sight and interchangeable illuminated front sight
Minimal covers

Recoil reduction of about 20%

The screw-on muzzle brake significantly reduces recoil, muzzle flash, and muzzle rise
Recoil reduction of about 35-50%
Possibility to apply muzzle threading later for Dual-Brake
With fluted Dual-Brake barrels, it can only be used without open sight system

Stock length 350 mm including Comfort recoil pad
Monte Carlo cheekpiece
Ergonomically adapted grip

For the stock wood, eleven quality levels of precious walnut wood can be chosen.
 
 
 

Available from class 8

For rifles and combination guns
The stainless steel cylinder filled with tungsten granulate reduces recoil effect by about 20%
The stock weight increases
Optimisation of weapon balance with heavy barrels

Optimal recoil attenuation

A noble detail with an important function: silently holds four cartridges, immediately at hand.
Blaser cartridge holder in the stock: optionally with elegant border engraving or full engraving. You can choose from arabesques or various types of foliage, or also animal figures, monogram, and other special decorations.
Not available in combination with Kickstop.

Engraving can be requested for:

personal monogram framed by arabesques or foliage
Animal figures
Custom decorations

For ZEISS ZM and VM optics with patented internal rail

 
 

For Swarovski optics with internal rai
patented rail Swarovski

 
 

For Swarovski optics with patented Schmidt & Bender internal rail

 
 

For scopes with central prism rail

 
 

Ø ring 25.4, 30 or 34 mm

Saddle mount for

Z-Point
Aimpoint Micro
Docter-Sight