STRIKE INDUSTRIES G.U.M. Support Optique Universel Glock V2

The Strike Industries G.U.M. Universal (Optics) Mount for GLOCK™ V2 is now available! This mount has been updated to allow additional compatibility with even more red dots on the market. Its minimal super low-profile design offers a sleek appearance with our patented SI Multi-Optic Mount pattern which accommodates most Mini/Micro Red Dot Sights (MRDS). COMPATIBILITY: For GLOCK™ GEN1-5 G17/G19/G20/G21/G22/G23/G24/G26/G27/G29/G30/G31/G32/G33/G34/G35/G36/G37/G38/G39/G40/G41/G44/G45/G47 NOT COMPATIBLE: GLOCK™ G42/G43/G43x/G48 (See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)RED DOT COMPATIBILITY: C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, RMR STANDARD, SHIELD STANDARD & all SIG SAUER Open Reflex Sights Product Features:-Minimal super low-profile design-SI Multi-Optic Mount fits most Mini/Micro Red Dot Sights (MRDS) in the market-No permanent milling or custom work required on slide-Included mounting posts and screws offer versatility for various red dot sights-Lowest height-over-bore mount in the industry-Solid S45C steel construction and black phosphate finish Package Contents:-x1 G.U.M. Universal (Optics) Mount for GLOCK™ Version 2-x8 G.U.M. mount set screw [M3x3mm 2.5mm Socket]-x3 Screw [M3x8mm T10 Flat]-x3 Screw [M3x9mm T10 Flat]-x3 Screw [M3x10mm T10 Flat]-x3 Screw [M3x8mm T14 Flat]-x3 Screw [M3x8mm T15 Flat]-x3 Screw [M3x7mm T10 Rounded]-x3 Screw [M3x8mm T10 Rounded]-x3 Screw [M3x10mm T10 Rounded]-x3 Screw [M3x10mm T11 Rounded]-x5 Large mounting post-x5 Small mounting post-x5 Shallow mounting post-x3 Tall mounting post-x1 Torx tool [T10]-x1 Hex tool [1.5mm]-x1 Loctite® Threadlocker Blue 243®-x1 Warning card WARNING:-There is a risk of marking your slide when properly securing this mount-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating-Be careful and use your best judgment on which hardware to use for your specific setup-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests -LENGTH: 48.50mm(1.91'')-WIDTH: 28.45mm(1.12'')-HEIGHT: 6.10mm(0.24'')-WEIGHT: 1.30 oz-WEIGHT W/ PKG: X.XX oz WARNING:-The below compatibility list is based on known SI test fitments as well as footprint data found online but do not guarantee 100% the full list is accurate-Please note there is also other possible red dot brand and model fitments that can work-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating-Be careful and use your best judgment on which hardware to use for your specific setup-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests-There is a risk of marking your slide when properly securing this mount -C-MORE STANDARD: (+ additional C-MORE Standard footprint optics not listed here) C-MORE SYSTEMS: Screw: x2 M3x10mm Rounded Mounting Post: x2 Small SIG SAUER: ROMEO3MAX/3XL Screw: x2 M3x10mm Rounded Mounting Post: x2 Small VORTEX OPTICS: RAZOR RED DOT Screw: x2 M3x11mm Rounded Mounting Post: x2 Small -DELTAPOINT PRO STANDARD: (+ additional DeltaPoint Pro Standard footprint optics not listed here) EOTECH: EFLX MINI REFLEX SIGHT (MRS) Screw: x2 M3x8mm Rounded Mounting Post: x2 Large LEUPOLD: DELTAPOINT PRO Screw: x2 M3x15mm Flat Mounting Post: x2 Large SIG SAUER: ROMEO1 Screw: x2 M3x8mm Flat Mounting Post: x2 Tall SIG SAUER: ROMEO1PRO Screw: x2 M3x8mm Flat Mounting Post: x2 Tall SIG SAUER: ROMEO2 Screw: x2 M3x14mm Flat Mounting Post: x2 Large -DOCTER/NOBLEX STANDARD: (+ additional Docter/Noblex Standard footprint optics not listed here) ATIBAL OPTICS: MRD V2/V3 RED DOT SIGHT Screw: x2 M3x8mm Rounded *Mounting Post: x4 Small(*MRD V3 housing mount post holes are taller than small SI mounting posts provided) BURRIS OPTICS: FASTFIRE™ 2 Screw: x2 M3x8mm Flat Mounting Post: x4 Small CRIMSON TRACE: CT RAD™ PRO Screw: x2 M3x8mm Flat Mounting Post: x4 Small PRIMARY ARMS: SLX RS-10 Screw: x2 M3x10mm Flat Mounting Post: x3 Small VORTEX OPTICS: VIPER RED DOT Screw: x2 M3x8mm Flat Mounting Post: x4 Small VORTEX OPTICS: VENOM RED DOT Screw: x2 M3x7mm Rounded Mounting Post: x4 Small -RMR STANDARD: (+ additional RMR Standard footprint optics not listed here) ATIBAL OPTICS: CRD RED DOT SIGHT Screw: x2 M3x8mm Flat Mounting Post: x2 Large HOLOSUN: 407C/507C/508T Screw: x2 M3x8mm Flat Mounting Post: x2 Large HOLOSUN: 509T *Screw: x2 M3x8mm Flat(*use RMR adapter plate provided by Holosun) Mounting Post: x2 Large SWAMPFOX OPTICS: JUSTICE/LIBERTY KINGSLAYER Screw: x2 M3x10mm Flat Mounting Post: x2 Large SWAMPFOX OPTICS: KRAKEN *Screw: x2 M3x6mm Flat(*use RMR adapter plate provided by Swampfox) Mounting Post: x2 Large TRIJICON: RMR/SRO Screw: x2 M3x10mm Flat Mounting Post: x2 Large -SHIELD STANDARD: (+ additional Shield Standard footprint optics not listed here) HOLOSUN: 407K/507K Screw: x2 M3x8mm Flat Mounting Post: x2 Shallow HOLOSUN: EPS CARRY MRS Screw: x2 M3x8mm Flat Mounting Post: Not Compatible SHIELD SIGHTS: AMS/RMS/RMS2/RMSC/ RMSX/SIS/SMS/SMS2/SMSC Screw: x2 M3x8mm Rounded Mounting Post: x2 Large SIG SAUER: ROMEOZERO Screw: x2 M3x8mm Flat Mounting Post: x2 Large SWAMPFOX OPTICS: SENTINEL Screw: x2 M3x9mm Rounded *Mounting Post: x2 Large(*mounting posts only using rear housing mount post holes) DISCLAIMER:This product is not manufactured, authorized, endorsed, or warrantied by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of parts or components for GLOCK pistols. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H parts and accessories visit www.glock.com.