MAGPUL MBUS Pro Offset Guidon en Acier - Arrière

Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution. The MBUS Pro Offset Rear Sight features durable QPQ salt bath nitrided steel construction, positive detented lockup when deployed, tool-less windage adjustment for easy zeroing, dual rear apertures, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups. ALL STEEL CONSTRUCTION Finished with QPQ salt bath nitride for extreme resistance to wear and corrosion WINDAGE ADJUSTMENT KNOB No tools required SNAG-FREE, TUCKED AWAY PROFILE WHEN STOWED Positive detents in both the up and down positions as well as on the elevation knob LOW PROFILE WHEN DEPLOYED Standard AR height over bore when deployed, 45 degree offset to the right-hand side SPECS Compatible accessories see under this article, accessories Position Rear Height above rail, stowed ~0.18 in. Length, stowed 2.0 in. Weight, w/ hardware 2.0 oz. Other Specs Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail. Only compatible with MBUS Pro OFFSET Front sight, MAG525. Small aperture dia.: 0.07 in. Large aperture dia.: 0.19 in. WINDAGE ADJUSTMENT ~0.5 MOA (0.566"/100m) per click with a 14.5" sight radius ~0.4 MOA (0.410"/100m) per click with a 20" sight radius MADE IN THE USA