EOTECH EXPS3-2 TAN COMPATIBLE CON VISIÓN NOCTURNA

EOTECH EXPS3-2 TAN NACHTSICHTKOMPATIBEL

Operator Grade Holographic Weapon Sight

An operator-grade Holographic Weapon Sight built for close-quarter engagements with fast-moving targets.

The HWS EXPS3™ is an excellent choice for professionals. The EXPS3 offers true two eyes open shooting for fast target acquisition, night vision compatible settings, and a 7mm raised quick detach base for lower 1/3 iron sight co-witness.

L X W X H

3.8" x 2.3" x 2.9" (96.5 x 58.4 x 73.7 mm)

Weight

11.2 oz (317.5 g)

Water Resistant

33ft. (10 m) depth

Mount

1" Weaver or MIL-STD-1913 rail

Windage & Elevation Adjustment

0.5 MOA per click

Brightness

20 daylight settings

10 additional settings for Gen I through III+ night vision devices

Power Source

1 x CR123 battery

Battery Life

1,000 continuous hours at nominal setting 12 at room temperature

Country of Origin

Made in USA

Included in the box:

HWS EXPS3™

Quick-Start Guide

Warranty Card

CR123 Battery

Protective Case

Our most popular reticle offered, the 68 MOA ring with 1 MOA dot provides three usable aiming points. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. When using other loads and calibers, the opera- tor will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns but will vary based on choke and shell selection. For ordering this reticle, the model codes will end in -0.