Match grip for Diana Chaser Bandit Airbug wood PLA - poplar wood 3D print

I’m selling a match grip for the Diana Chaser or Bandit from the 3D printer.Printed with wood PLA - poplar wood. Fine wood particles were added to the PLA, and according to the manufacturer, it can be treated like real wood, so sanding, oiling, or waxing is possible.The screws and nuts for the palm rest are supplied in silver.Delivered for right-handers! If you’re left-handed, please write to me, then I’ll change the print.Images 1&2 show the grip sanded down; the grip is delivered unsanded!!! So if desired, you have to sand it yourself.Images 3 to 6 show how the grip is delivered. Unfortunately, the palm rest does not lie flush on the grip in the rear part, which is due to the template. The gap can be seen in the photos. If not desired, it must be sanded.You can see that the grip comes from the 3D printer, but if sanded down, it could pass as wood grain ;)The shown Bandit and red dot sight are of course not included; you’re only buying the grip here.The conversion is quite simple: Please google Diana Chaser exploded view. Remove screw 61 and you can take off your existing grip. The "Piston Cover," part 53, must be turned so that the "duckbill" is on top. For this, remove screw 54 and reinsert it later.Private sale, no returns or warranty.Credits: Design by Zeubest (Thingiverse: #6253737). Licensed under CC BY-SA 4.0.