Match grip for Diana Chaser Bandit Airbug wood PLA - poplar wood

I am selling a match grip for the Diana Chaser or Bandit made from a 3D printer.Printed with wood PLA - poplar wood. Fine wood particles have been added to the PLA, and according to the manufacturer, it can be treated like real wood, meaning sanding, oiling, or waxing.The screws and nuts for the palm rest are included in silver.It is delivered for right-handed users! If you are left-handed, please write to me, and I will change the print.Images 1&2 show the grip after sanding; the grip will be delivered unsanded!!! So, if desired, you will need to sand it yourself.Images 3 to 6 show how the grip will be delivered. Unfortunately, the palm rest does not sit flat on the grip at the rear, which is due to the template. The gap can be seen in the photos. If this is not desired, further sanding will be necessary.It is visible that the grip comes from a 3D printer, but if it is sanded, it could pass as wood grain ;)The shown Bandit and Reddot are of course not included; you are only purchasing the grip here.The conversion is quite simple: Please google for the Diana Chaser exploded view. Remove screw 61, and you can take off your existing grip. The "Piston Cover," part 53, must be rotated so that the "duck bill" is on top. To do this, remove screw 54 and later reinsert it.Private sale, no returns or warranty.Credits: Design by Zeubest (Thingiverse: #6253737). Licensed under CC BY-SA 4.0.